JK.eng.br

Para aprender a salvar os mapkeys no Pro|E, leia este post: Mapkeys no Pro|E

mapkey $F1 @MAPKEY_LABELShade;~ Select `main_dlg_cur` `MenuBar1`1 `View`;\
mapkey(continued) ~ Select `main_dlg_cur` `View.cb_view_advanced`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Close `main_dlg_cur` `View.cb_view_advanced`;\
mapkey(continued) ~ Activate `main_dlg_cur` `psh_view_mdldisp`;\
mapkey(continued) ~ Select `modeldisplay` `ModDsply_Tab`1 `ModDsply_Layout_Shade`;\
mapkey(continued) ~ Update `modeldisplay` `ModDsply_SB_ShadeQlty`4 ;\
mapkey(continued) ~ Update `modeldisplay` `ModDsply_SB_ShadeQlty`5 ;\
mapkey(continued) ~ Update `modeldisplay` `ModDsply_SB_ShadeQlty`6 ;\
mapkey(continued) ~ Update `modeldisplay` `ModDsply_SB_ShadeQlty`7 ;\
mapkey(continued) ~ Update `modeldisplay` `ModDsply_SB_ShadeQlty`8 ;\
mapkey(continued) ~ Update `modeldisplay` `ModDsply_SB_ShadeQlty`9 ;\
mapkey(continued) ~ Update `modeldisplay` `ModDsply_SB_ShadeQlty`10 ;\
mapkey(continued) ~ Activate `modeldisplay` `ModDsply_PB_Apply`;\
mapkey(continued) ~ Activate `modeldisplay` `ModDsply_PB_OK`;

mapkey es @MAPKEY_LABELedit sketch;\
mapkey(continued) ~ Activate `main_dlg_cur` `chkbn.extrev_1_placement.0`1 ;\
mapkey(continued) ~ Activate `extrev_1_placement.0.0` `PH.Sketch`;\
mapkey(continued) ~ Activate `Odui_Dlg_01` `stdbtn_3`;\
mapkey(continued) ~ Select `main_dlg_cur` `ProCmdEnvMdlDisp.mdisp`1 `No hidden`;\
mapkey(continued) ~ Activate `GET SELECT` `quit_sel`;

mapkey pp @MAPKEY_LABELcreate protrusion;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdFtExtrude.a_feat`;\
mapkey(continued) ~ Activate `main_dlg_cur` `chkbn.extrev_1_placement.0`1 ;\
mapkey(continued) ~ Activate `extrev_1_placement.0.0` `PH.Sketch`;\
mapkey(continued) ~ Activate `Odui_Dlg_01` `stdbtn_1`;~ Activate `references` `Close`;\
mapkey(continued) ~ Select `main_dlg_cur` `ProCmdEnvMdlDisp.mdisp`1 `No hidden`;

mapkey ln @MAPKEY_NAMELaunch Notepad;@MAPKEY_LABELnotepad;\
mapkey(continued) @SYSTEMc:\\\%username\%\\prodata\\notepad.bat;
mapkey le @MAPKEY_NAMELaunch Excel;@MAPKEY_LABELexcel;\
mapkey(continued) @SYSTEMc:\\\%username\%\\prodata\\excel.bat;
mapkey lc @MAPKEY_LABELCalculator;@SYSTEMc:\\\%username\%\\prodata\\calc.bat;
mapkey lt @MAPKEY_NAMELaunch CETOL;@MAPKEY_LABELCETOL;\
mapkey(continued) @SYSTEMc:\\\%username\%\\prodata\\cetol.bat;
mapkey lo @MAPKEY_NAMELaunch Outllok;@MAPKEY_LABELOutlook;\
mapkey(continued) @SYSTEMc:\\\%username\%\\prodata\\outlook.bat;

mapkey dd #environment;#disp dtmpln;#done-return
mapkey da #environment;#disp axes;#done-return
mapkey dc #environment;#disp csys;#done-return
mapkey dp #environment;#disp points;#done-return

mapkey vf ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\
mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `FRONT`;

mapkey vb ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\
mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `BACK`;

mapkey vt ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\
mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `TOP`;

mapkey vr ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\
mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `RIGHT`;

mapkey vl ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\
mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `LEFT`;

mapkey vu ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\
mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `BOTTOM`;

mapkey vv ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\
mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `Default`;

mapkey hy @MAPKEY_LABELhighlight YES;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Edit`;\
mapkey(continued) ~ Select `main_dlg_cur` `Edit.cbSelect`;~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Close `main_dlg_cur` `Edit.cbSelect`;\
mapkey(continued) ~ Activate `main_dlg_cur` `psh_sel_filter`;\
mapkey(continued) ~ Activate `selprefs` `PrehButton`1 ;~ Activate `selprefs` `Ok`;
mapkey hn @MAPKEY_LABELhighlite NO;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Edit`;\
mapkey(continued) ~ Select `main_dlg_cur` `Edit.cbSelect`;~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Close `main_dlg_cur` `Edit.cbSelect`;\
mapkey(continued) ~ Activate `main_dlg_cur` `psh_sel_filter`;\
mapkey(continued) ~ Activate `selprefs` `PrehButton`0 ;~ Activate `selprefs` `Ok`;
mapkey dd @MAPKEY_LABELdisplay datums;#environment;#disp dtmpln;\
mapkey(continued) #done-return
mapkey da @MAPKEY_LABELdisplay axes;#environment;#disp axes;#done-return
mapkey dc @MAPKEY_LABELdisplay csys;#environment;#disp csys;#done-return
mapkey dp @MAPKEY_LABELdisplay points;#environment;#disp points;\
mapkey(continued) #done-return
mapkey vf @MAPKEY_LABELview front;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\
mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `FRONT`;
mapkey vb @MAPKEY_LABELview back;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\
mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `BACK`;
mapkey vt @MAPKEY_LABELview top;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\
mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `TOP`;
mapkey vr @MAPKEY_LABELview right;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\
mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `RIGHT`;
mapkey vl @MAPKEY_LABELview left;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\
mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `LEFT`;
mapkey vu @MAPKEY_LABELview under (bottom);\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\
mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `BOTTOM`;
mapkey vd @MAPKEY_LABELview default;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\
mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `Default`;
mapkey ww @MAPKEY_LABELworkspace change;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Utilities`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `Utilities.psh_util_weblnk_server_registry`;
mapkey ms @MAPKEY_LABELmeasure surface distance;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Analysis`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `Analysis.psh_analysis_measure`;\
mapkey(continued) ~ Open `measure` `MsrTypeOptions`;~ Close `measure` `MsrTypeOptions`;\
mapkey(continued) ~ Select `measure` `MsrTypeOptions`1 `Distance`;\
mapkey(continued) ~ Open `measure` `DistProjRefOptions`;~ Close `measure` `DistProjRefOptions`;\
mapkey(continued) ~ Select `measure` `DistProjRefOptions`1 `Csys`;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdMdlTreeSearch.edit_t`;\
mapkey(continued) ~ Open `selspecdlg0` `SelOptionRadio`;~ Close `selspecdlg0` `SelOptionRadio`;\
mapkey(continued) ~ Select `selspecdlg0` `SelOptionRadio`1 `Coord Sys`;\
mapkey(continued) ~ Open `selspecdlg0` `LookByOptionMenu`;\
mapkey(continued) ~ Close `selspecdlg0` `LookByOptionMenu`;\
mapkey(continued) ~ Select `selspecdlg0` `LookByOptionMenu`1 `Coord Sys`;\
mapkey(continued) ~ Activate `selspecdlg0` `EvaluateBtn`;~ Activate `selspecdlg0` `ApplyBtn`;\
mapkey(continued) ~ Activate `selspecdlg0` `CancelButton`;#CARTESIAN;\
mapkey(continued) ~ Open `measure` `DistFromOptions`;~ Close `measure` `DistFromOptions`;\
mapkey(continued) ~ Select `measure` `DistFromOptions`1 `Plane`;\
mapkey(continued) ~ Open `measure` `DistToOptions`;~ Close `measure` `DistToOptions`;\
mapkey(continued) ~ Select `measure` `DistToOptions`1 `Plane`;
mapkey mp @MAPKEY_LABELmeasure points distance;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Analysis`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `Analysis.psh_analysis_measure`;\
mapkey(continued) ~ Open `measure` `DistProjRefOptions`;~ Close `measure` `DistProjRefOptions`;\
mapkey(continued) ~ Select `measure` `DistProjRefOptions`1 `Csys`;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdMdlTreeSearch.edit_t`;\
mapkey(continued) ~ Activate `selspecdlg0` `EvaluateBtn`;~ Activate `selspecdlg0` `ApplyBtn`;\
mapkey(continued) ~ Activate `selspecdlg0` `CancelButton`;~ Open `measure` `DistFromOptions`;\
mapkey(continued) ~ Close `measure` `DistFromOptions`;\
mapkey(continued) ~ Select `measure` `DistFromOptions`1 `Point`;\
mapkey(continued) ~ Open `measure` `DistToOptions`;~ Close `measure` `DistToOptions`;\
mapkey(continued) ~ Select `measure` `DistToOptions`1 `Point`;
mapkey mp @MAPKEY_LABELmeasure points distance;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Analysis`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `Analysis.psh_analysis_measure`;\
mapkey(continued) ~ Open `measure` `MsrTypeOptions`;~ Close `measure` `MsrTypeOptions`;\
mapkey(continued) ~ Select `measure` `MsrTypeOptions`1 `Distance`;\
mapkey(continued) ~ Open `measure` `DistProjRefOptions`;~ Close `measure` `DistProjRefOptions`;\
mapkey(continued) ~ Select `measure` `DistProjRefOptions`1 `Csys`;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdMdlTreeSearch.edit_t`;\
mapkey(continued) ~ Activate `selspecdlg0` `EvaluateBtn`;~ Activate `selspecdlg0` `ApplyBtn`;\
mapkey(continued) ~ Activate `selspecdlg0` `CancelButton`;#CARTESIAN;\
mapkey(continued) ~ Open `measure` `DistToOptions`;~ Close `measure` `DistToOptions`;\
mapkey(continued) ~ Select `measure` `DistToOptions`1 `Point`;\
mapkey(continued) ~ Open `measure` `DistFromOptions`;~ Close `measure` `DistFromOptions`;\
mapkey(continued) ~ Select `measure` `DistFromOptions`1 `Point`;
mapkey ms @MAPKEY_LABELmeasure surface distance;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Analysis`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `Analysis.psh_analysis_measure`;\
mapkey(continued) ~ Open `measure` `MsrTypeOptions`;~ Close `measure` `MsrTypeOptions`;\
mapkey(continued) ~ Select `measure` `MsrTypeOptions`1 `Distance`;\
mapkey(continued) ~ Open `measure` `DistProjRefOptions`;~ Close `measure` `DistProjRefOptions`;\
mapkey(continued) ~ Select `measure` `DistProjRefOptions`1 `Csys`;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdMdlTreeSearch.edit_t`;\
mapkey(continued) ~ Activate `selspecdlg0` `EvaluateBtn`;~ Activate `selspecdlg0` `ApplyBtn`;\
mapkey(continued) ~ Activate `selspecdlg0` `CancelButton`;#CARTESIAN;\
mapkey(continued) ~ Open `measure` `DistToOptions`;~ Close `measure` `DistToOptions`;\
mapkey(continued) ~ Select `measure` `DistToOptions`1 `Plane`;\
mapkey(continued) ~ Open `measure` `DistFromOptions`;~ Close `measure` `DistFromOptions`;\
mapkey(continued) ~ Select `measure` `DistFromOptions`1 `Plane`;
mapkey ss @MAPKEY_LABELsave;~ Activate `main_dlg_cur` `ProCmdModelSave.file`;\
mapkey(continued) ~ Activate `file_saveas` `OK`;
mapkey sc @MAPKEY_LABELsave & checkin;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `File`;\
mapkey(continued) ~ Select `main_dlg_cur` `File.CheckinCascade_fp`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Close `main_dlg_cur` `File.CheckinCascade_fp`;\
mapkey(continued) ~ Activate `main_dlg_cur` `ExpressPb_fp`;~ Activate `file_saveas` `OK`;

mapkey zz @MAPKEY_LABELzoom in;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewZoomIn.view`;
mapkey za @MAPKEY_LABELzoom all;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewRefit.view`;;
mapkey zx @MAPKEY_LABELzoom out;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewZoomOut.view`;
mapkey dx @MAPKEY_LABELdim;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdDwgCrStdNewRefDim.dwg`;
mapkey pr @MAPKEY_LABELprint;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdModelPrint.file`;

mapkey dr @MAPKEY_LABELdimension ref;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdDwgCrRefStdNRDim.dwg`;
mapkey de @MAPKEY_LABELdelete;\
mapkey(continued) ~ Timer `UI Desktop` `UI Desktop` `popupMenuRMBTimerCB`;\
mapkey(continued) ~ Close `rmb_popup` `PopupMenu`;\
mapkey(continued) ~ Timer `UI Desktop` `UI Desktop` `popupMenuRMBTimerCB`;\
mapkey(continued) ~ Close `rmb_popup` `PopupMenu`;~ Activate `rmb_popup` `DwgPopupEditDelete`;

mapkey nn @MAPKEY_LABELnote;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdDwgCreateNote.help`;
mapkey fn @MAPKEY_LABELfree note;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdDwgCreateNote.dwg`;#MAKE NOTE;#DONE;
mapkey pb @MAPKEY_LABELprint B;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdModelPrint.file`;\
mapkey(continued) ~ Activate `print` `Configure`;~ Open `print_config` `o_size`;\
mapkey(continued) ~ Close `print_config` `o_size`;~ Select `print_config` `o_size`1 `B`;\
mapkey(continued) ~ Activate `print_config` `OK`;~ Activate `print` `OK`;\
mapkey(continued) ~ Activate `main_dlg_cur` `main_dlg_cur`;\
mapkey(continued) ~ Resize `main_dlg_cur` `main_dlg_cur`4 0.000000 0.000000 32.928292 \
mapkey(continued) 25.700130 ;~ Move `main_dlg_cur` `main_dlg_cur`2 0.000000 0.000000;

mapkey vd @MAPKEY_LABELview detail;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Insert`;\
mapkey(continued) ~ Select `main_dlg_cur` `Insert.cb_dwg_sym`;\
mapkey(continued) ~ Close `main_dlg_cur` `Insert.cb_dwg_sym`;\
mapkey(continued) ~ Select `main_dlg_cur` `Insert.cb_dwg_view`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Close `main_dlg_cur` `Insert.cb_dwg_view`;\
mapkey(continued) ~ Activate `main_dlg_cur` `psh_dwg_view_det`;
mapkey va @MAPKEY_LABELview aux;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Insert`;\
mapkey(continued) ~ Select `main_dlg_cur` `Insert.cb_dwg_view`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Close `main_dlg_cur` `Insert.cb_dwg_view`;\
mapkey(continued) ~ Activate `main_dlg_cur` `psh_dwg_view_aux`;
mapkey vg @MAPKEY_LABELview general;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Insert`;\
mapkey(continued) ~ Select `main_dlg_cur` `Insert.cb_dwg_view`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Close `main_dlg_cur` `Insert.cb_dwg_view`;\
mapkey(continued) ~ Activate `main_dlg_cur` `psh_dwg_view_gen`;
mapkey vp @MAPKEY_LABELview projection;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Insert`;\
mapkey(continued) ~ Select `main_dlg_cur` `Insert.cb_dwg_view`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Close `main_dlg_cur` `Insert.cb_dwg_view`;\
mapkey(continued) ~ Activate `main_dlg_cur` `psh_dwg_view_proj`;
mapkey rm @MAPKEY_LABELregen model;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Edit`;\
mapkey(continued) ~ Select `main_dlg_cur` `Edit.cb_dwg_regen`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;~ Close `main_dlg_cur` `Edit.cb_dwg_regen`;\
mapkey(continued) ~ Activate `main_dlg_cur` `psh_dwg_regen_model`;
mapkey rv @MAPKEY_LABELregen draft;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Edit`;\
mapkey(continued) ~ Select `main_dlg_cur` `Edit.cb_dwg_regen`;\
mapkey(continued) ~ Close `main_dlg_cur` `Edit.cb_dwg_regen`;~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Edit`;\
mapkey(continued) ~ Select `main_dlg_cur` `Edit.cb_dwg_regen`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;~ Close `main_dlg_cur` `Edit.cb_dwg_regen`;\
mapkey(continued) ~ Activate `main_dlg_cur` `psh_dwg_regen_draft`;

mapkey rf @MAPKEY_LABELre fit;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewRefit.view`;
mapkey bb @MAPKEY_LABELbreak;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdDwgDtlBreak.dwg`;
mapkey sd @MAPKEY_LABELshow dim;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdDwgShowErase.dwg`;
mapkey pa @MAPKEY_LABELprint a;~ Select `main_dlg_cur` `MenuBar1`1 `File`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;~ Activate `main_dlg_cur` `File.psh_print`;\
mapkey(continued) ~ Activate `print` `Configure`;~ Open `print_config` `o_size`;\
mapkey(continued) ~ Close `print_config` `o_size`;~ Select `print_config` `o_size`1 `A`;\
mapkey(continued) ~ Activate `print_config` `OK`;~ Activate `print` `OK`;\
mapkey(continued) ~ Activate `main_dlg_cur` `main_dlg_cur`;
mapkey li @MAPKEY_LABELinternet;@SYSTEMc:\nate_temp\internet.bat;
mapkey vv @MAPKEY_LABELview default;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewNamePick.view`1 ;\
mapkey(continued) ~ Select `nameviewlist` `nv_list`1 `Default`;
mapkey dx @MAPKEY_LABELdim create;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdDwgCrStdNewRefDim.dwg`;
mapkey bb @MAPKEY_LABELbreak dimension;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdDwgDtlBreak.dwg`;
mapkey $F1 @MAPKEY_LABELShade quality;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `View`;\
mapkey(continued) ~ Select `main_dlg_cur` `View.cb_view_advanced`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Close `main_dlg_cur` `View.cb_view_advanced`;\
mapkey(continued) ~ Activate `main_dlg_cur` `psh_view_mdldisp`;\
mapkey(continued) ~ Select `modeldisplay` `ModDsply_Tab`1 `ModDsply_Layout_Shade`;\
mapkey(continued) ~ Update `modeldisplay` `ModDsply_SB_ShadeQlty`4 ;\
mapkey(continued) ~ Update `modeldisplay` `ModDsply_SB_ShadeQlty`5 ;\
mapkey(continued) ~ Update `modeldisplay` `ModDsply_SB_ShadeQlty`6 ;\
mapkey(continued) ~ Update `modeldisplay` `ModDsply_SB_ShadeQlty`7 ;\
mapkey(continued) ~ Update `modeldisplay` `ModDsply_SB_ShadeQlty`8 ;\
mapkey(continued) ~ Update `modeldisplay` `ModDsply_SB_ShadeQlty`9 ;\
mapkey(continued) ~ Update `modeldisplay` `ModDsply_SB_ShadeQlty`10 ;\
mapkey(continued) ~ Activate `modeldisplay` `ModDsply_PB_Apply`;\
mapkey(continued) ~ Activate `modeldisplay` `ModDsply_PB_OK`;
mapkey cc @MAPKEY_LABELcreate curve;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdDatumSketCurve.datum`;\
mapkey(continued) ~ Activate `Odui_Dlg_00` `stdbtn_1`;~ Activate `references` `Close`;\
mapkey(continued) ~ Select `main_dlg_cur` `ProCmdEnvMdlDisp.mdisp`1 `No hidden`;
mapkey ln @MAPKEY_NAMELaunch Notepad;@MAPKEY_LABELnotepad launch;\
mapkey(continued) @SYSTEMc:\nate_temp\notepad.bat;
mapkey le @MAPKEY_NAMELaunch Excel;@MAPKEY_LABELexcel launch;\
mapkey(continued) @SYSTEMc:\\\%username\%\\prodata\\excel.bat;
mapkey lt @MAPKEY_NAMELaunch CETOL;@MAPKEY_LABELCETOL launch;\
mapkey(continued) @SYSTEMc:\\\%username\%\\prodata\\cetol.bat;
mapkey lo @MAPKEY_NAMELaunch Outllok;@MAPKEY_LABELOutlook launch;\
mapkey(continued) @SYSTEMc:\\\%username\%\\prodata\\outlook.bat;
mapkey nn @MAPKEY_LABELnote create;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdDwgCreateNote.help`;
mapkey li @MAPKEY_LABELinternet launch;\
mapkey(continued) @SYSTEMc:\\\%username\%\\prodata\\internet.bat;
mapkey am @MAPKEY_LABELadd model;~ Select `main_dlg_cur` `MenuBar1`1 `Edit`;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `File`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `File.psh_properties`;#DRAWING MODELS;#ADD MODEL;
mapkey sm @MAPKEY_LABELset model;\
mapkey(continued) ~ Move `main_dlg_cur` `main_dlg_cur`2 -0.046706 1.307756 ;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `File`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `File.psh_properties`;#DRAWING MODELS;#SET MODEL;
mapkey $F2 @MAPKEY_LABELhidden line;\
mapkey(continued) ~ Select `main_dlg_cur` `ProCmdEnvMdlDisp.mdisp`1 `Hidden line`;
mapkey $F3 @MAPKEY_LABELWireframe;\
mapkey(continued) ~ Select `main_dlg_cur` `ProCmdEnvMdlDisp.mdisp`1 `No hidden`;
mapkey $F4 @MAPKEY_LABELshade;\
mapkey(continued) ~ Select `main_dlg_cur` `ProCmdEnvMdlDisp.mdisp`1 `Shading`;
mapkey $F5 @MAPKEY_LABELx-sections;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewVisTool.view`;\
mapkey(continued) ~ Select `visual_dlg0` `RadioSelApplMgr`1 `xsec`;
mapkey gg @MAPKEY_LABELregenerate;\
mapkey(continued) ~ Activate `main_dlg_cur` `Edit.pshRegenAuto`;

mapkey $F7 @MAPKEY_LABELdefault background;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `View`;\
mapkey(continued) ~ Select `main_dlg_cur` `View.cb_view_mdlsetup`;\
mapkey(continued) ~ Close `main_dlg_cur` `View.cb_view_mdlsetup`;\
mapkey(continued) ~ Select `main_dlg_cur` `View.cb_view_advanced`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Close `main_dlg_cur` `View.cb_view_advanced`;\
mapkey(continued) ~ Activate `main_dlg_cur` `psh_util_colors_sys`;\
mapkey(continued) ~ Select `color_scheme` `MenuBar2`1 `MenuScheme`;\
mapkey(continued) ~ Close `color_scheme` `MenuBar2`;~ Activate `color_scheme` `Scheme1`;\
mapkey(continued) ~ Activate `color_scheme` `OK`;

mapkey $F9 @MAPKEY_LABELnight;~ Select `main_dlg_cur` `MenuBar1`1 `View`;\
mapkey(continued) ~ Select `main_dlg_cur` `View.cb_view_advanced`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Close `main_dlg_cur` `View.cb_view_advanced`;\
mapkey(continued) ~ Activate `main_dlg_cur` `psh_util_colors_sys`;\
mapkey(continued) ~ Activate `color_scheme` `BlendCB`0 ;~ Activate `color_scheme` `OK`;
mapkey $F9 @MAPKEY_LABELnight;~ Select `main_dlg_cur` `MenuBar1`1 `View`;\
mapkey(continued) ~ Select `main_dlg_cur` `View.cb_view_advanced`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Close `main_dlg_cur` `View.cb_view_advanced`;\
mapkey(continued) ~ Activate `main_dlg_cur` `psh_util_colors_sys`;\
mapkey(continued) ~ Activate `color_scheme` `BlendCB`0 ;~ Activate `color_scheme` `CColor0`1 ;\
mapkey(continued) ~ Activate `color_scheme` `CColor0`1 ;~ Activate `color_scheme` `BColor0`;\
mapkey(continued) ~ Activate `pgl_color_editor` `StdOk`;~ Activate `color_scheme` `CColor0`0 ;\
mapkey(continued) ~ Activate `color_scheme` `CColor0`1 ;~ Activate `color_scheme` `OK`;
mapkey $F8 @MAPKEY_LABELwhite;~ Select `main_dlg_cur` `MenuBar1`1 `Edit`;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `View`;\
mapkey(continued) ~ Select `main_dlg_cur` `View.cb_view_advanced`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Close `main_dlg_cur` `View.cb_view_advanced`;\
mapkey(continued) ~ Activate `main_dlg_cur` `psh_util_colors_sys`;\
mapkey(continued) ~ Activate `color_scheme` `BlendCB`0 ;~ Activate `color_scheme` `BColor0`;\
mapkey(continued) ~ Update `pgl_color_editor` `IRed` `255`;\
mapkey(continued) ~ FocusOut `pgl_color_editor` `IRed`;\
mapkey(continued) ~ Update `pgl_color_editor` `IGreen` `255`;\
mapkey(continued) ~ FocusOut `pgl_color_editor` `IGreen`;\
mapkey(continued) ~ Update `pgl_color_editor` `IBlue` `255`;\
mapkey(continued) ~ FocusOut `pgl_color_editor` `IBlue`;~ FocusOut `pgl_color_editor` `IGreen`;\
mapkey(continued) ~ Activate `pgl_color_editor` `StdOk`;~ Activate `color_scheme` `CColor0`0 ;\
mapkey(continued) ~ Activate `color_scheme` `CColor0`1 ;~ Activate `color_scheme` `OK`;
mapkey $F6 @MAPKEY_LABELset color;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `View`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `View.push_view_appearances`;\
mapkey(continued) ~ FocusOut `pgl_appearance_editor` `AppearanceName`;

mapkey p0 #MODIFY;#NUM DIGITS;0;
mapkey p1 #MODIFY;#NUM DIGITS;1;
mapkey p2 #MODIFY;#NUM DIGITS;2;
mapkey p3 #MODIFY;#NUM DIGITS;3;
mapkey p4 #MODIFY;#NUM DIGITS;4;
mapkey p5 #MODIFY;#NUM DIGITS;5;
mapkey p6 #MODIFY;#NUM DIGITS;6;
mapkey p7 #MODIFY;#NUM DIGITS;7;
mapkey p8 #MODIFY;#NUM DIGITS;8;
mapkey p9 #MODIFY;#NUM DIGITS;9;
mapkey ! @MAPKEY_LABELsheet1;~ Select `main_dlg_cur` `MenuBar1`1 `View`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `View.psh_view_goto_sheet`;\
mapkey(continued) ~ Input `gotosheet` `InpPagenum` `1`;~ Update `gotosheet` `InpPagenum` `1`;\
mapkey(continued) ~ FocusOut `gotosheet` `InpPagenum`;~ Activate `gotosheet` `Goto`;\
mapkey(continued) ~ Activate `gotosheet` `Close`;
mapkey @ @MAPKEY_LABELsheet2;~ Select `main_dlg_cur` `MenuBar1`1 `View`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `View.psh_view_goto_sheet`;\
mapkey(continued) ~ Input `gotosheet` `InpPagenum` `2`;~ Update `gotosheet` `InpPagenum` `2`;\
mapkey(continued) ~ FocusOut `gotosheet` `InpPagenum`;~ Activate `gotosheet` `Goto`;\
mapkey(continued) ~ Activate `gotosheet` `Close`;
mapkey # @MAPKEY_LABELsheet3;~ Select `main_dlg_cur` `MenuBar1`1 `Insert`;\
mapkey(continued) ~ Select `main_dlg_cur` `Insert.cb_dwg_dim`;\
mapkey(continued) ~ Close `main_dlg_cur` `Insert.cb_dwg_dim`;\
mapkey(continued) ~ Select `main_dlg_cur` `Insert.cb_dwg_ref_dim`;\
mapkey(continued) ~ Close `main_dlg_cur` `Insert.cb_dwg_ref_dim`;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `View`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `View.psh_view_goto_sheet`;\
mapkey(continued) ~ Input `gotosheet` `InpPagenum` `3`;~ Update `gotosheet` `InpPagenum` `3`;\
mapkey(continued) ~ FocusOut `gotosheet` `InpPagenum`;~ Activate `gotosheet` `Goto`;\
mapkey(continued) ~ Activate `gotosheet` `Close`;

mapkey $ @MAPKEY_LABELsheet4;~ Select `main_dlg_cur` `MenuBar1`1 `Insert`;\
mapkey(continued) ~ Select `main_dlg_cur` `Insert.cb_dwg_dim`;\
mapkey(continued) ~ Close `main_dlg_cur` `Insert.cb_dwg_dim`;\
mapkey(continued) ~ Select `main_dlg_cur` `Insert.cb_dwg_ref_dim`;\
mapkey(continued) ~ Close `main_dlg_cur` `Insert.cb_dwg_ref_dim`;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `View`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `View.psh_view_goto_sheet`;\
mapkey(continued) ~ Input `gotosheet` `InpPagenum` `4`;~ Update `gotosheet` `InpPagenum` `4`;\
mapkey(continued) ~ FocusOut `gotosheet` `InpPagenum`;~ Activate `gotosheet` `Goto`;\
mapkey(continued) ~ Activate `gotosheet` `Close`;

mapkey % @MAPKEY_LABELsheet5;~ Select `main_dlg_cur` `MenuBar1`1 `View`;\
mapkey(continued) ~ Select `main_dlg_cur` `View.OrientationCascadeBtn`;\
mapkey(continued) ~ Close `main_dlg_cur` `View.OrientationCascadeBtn`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `View.psh_view_goto_sheet`;\
mapkey(continued) ~ Input `gotosheet` `InpPagenum` `5`;~ Update `gotosheet` `InpPagenum` `5`;\
mapkey(continued) ~ FocusOut `gotosheet` `InpPagenum`;~ Activate `gotosheet` `Goto`;\
mapkey(continued) ~ Activate `gotosheet` `Close`;

mapkey ^ @MAPKEY_LABELsheet6;~ Select `main_dlg_cur` `MenuBar1`1 `View`;\
mapkey(continued) ~ Select `main_dlg_cur` `View.OrientationCascadeBtn`;\
mapkey(continued) ~ Close `main_dlg_cur` `View.OrientationCascadeBtn`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `View.psh_view_goto_sheet`;\
mapkey(continued) ~ Input `gotosheet` `InpPagenum` `6`;~ Update `gotosheet` `InpPagenum` `6`;\
mapkey(continued) ~ FocusOut `gotosheet` `InpPagenum`;~ Activate `gotosheet` `Goto`;\
mapkey(continued) ~ Activate `gotosheet` `Close`;
mapkey pj @MAPKEY_LABELprint JPEG;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `File`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `File.psh_save_as`;\
mapkey(continued) ~ Open `file_saveas` `type_option`;~ Close `file_saveas` `type_option`;\
mapkey(continued) ~ Select `file_saveas` `type_option`1 `db_566`;\
mapkey(continued) ~ Activate `file_saveas` `OK`;~ FocusIn `UI Message Dialog` `ok`;\
mapkey(continued) ~ Activate `UI Message Dialog` `ok`;~ Open `shd_img_param` `o_dpi`;\
mapkey(continued) ~ Close `shd_img_param` `o_dpi`;~ Select `shd_img_param` `o_dpi`1 `dpi300`;\
mapkey(continued) ~ Activate `shd_img_param` `OK`;
mapkey p1 @MAPKEY_LABELprecision = 1;#MODIFY;#NUM DIGITS;1;

mapkey ff @MAPKEY_LABELfeature filter;\
mapkey(continued) ~ Open `main_dlg_cur` `Sst_bar.filter_list`;\
mapkey(continued) ~ Close `main_dlg_cur` `Sst_bar.filter_list`;\
mapkey(continued) ~ Select `main_dlg_cur` `Sst_bar.filter_list`1 `1`;
mapkey fg @MAPKEY_LABELfilter geometry;\
mapkey(continued) ~ Open `main_dlg_cur` `Sst_bar.filter_list`;\
mapkey(continued) ~ Close `main_dlg_cur` `Sst_bar.filter_list`;\
mapkey(continued) ~ Select `main_dlg_cur` `Sst_bar.filter_list`1 `2`;
mapkey fs @MAPKEY_LABELfilter smart;\
mapkey(continued) ~ Open `main_dlg_cur` `Sst_bar.filter_list`;\
mapkey(continued) ~ Close `main_dlg_cur` `Sst_bar.filter_list`;\
mapkey(continued) ~ Select `main_dlg_cur` `Sst_bar.filter_list`1 `0`;
mapkey y @MAPKEY_LABELlayers;~ Select `main_dlg_cur` `MenuBar1`1 `View`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `View.psh_view_lyrs`;
mapkey t @MAPKEY_LABELtree;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdEnvModelTree.mdisp`0;
mapkey aa @MAPKEY_LABELactivate;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Windows`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `Windows.psh_win_activate`;
mapkey gg @MAPKEY_LABELregenerate;#REGENERATE;
mapkey $F5 @MAPKEY_LABELx-sections;#X-SECTION;
mapkey sp @MAPKEY_LABELspin center;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `View`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `View.psh_view_orient`;\
mapkey(continued) ~ Open `orient` `SetupOptions`;~ Close `orient` `SetupOptions`;\
mapkey(continued) ~ Select `orient` `SetupOptions`1 `setup`;
mapkey cx @MAPKEY_LABELcomposite exact;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdDatumCurve.datum`;#COMPOSITE;#DONE;#DONE;
mapkey bb @MAPKEY_LABELboundary blemd;#FEATURE;#CREATE;#SURFACE;#NEW;\
mapkey(continued) #ADVANCED;#DONE;#BOUNDARIES;#DONE;#DONE;
mapkey ln @MAPKEY_NAMELaunch Notepad;@MAPKEY_LABELnotepad launch;\
mapkey(continued) @SYSTEMc:\\nate_temp\\notepad.bat;
mapkey le @MAPKEY_NAMELaunch Excel;@MAPKEY_LABELexcel launch;\
mapkey(continued) @SYSTEMc:\\nate_temp\\excel.bat;
mapkey lo @MAPKEY_NAMELaunch Outllok;@MAPKEY_LABELOutlook launch;\
mapkey(continued) @SYSTEMc:\\nate_temp\\outlook.bat;
mapkey lc @MAPKEY_LABELCalculator;@SYSTEMc:\\nate_temp\\calc.bat;
mapkey nn @MAPKEY_LABELname;#SET UP;#NAME;
display_plane_tags yes
bell no
mapkey cm @MAPKEY_LABELcopy mittor;#FEATURE;#COPY;#MIRROR;#DEPENDENT;#DONE;
mapkey nn @MAPKEY_LABELrename;#SET UP;#NAME;
mdl_tree_cfg_file F:\ptc_wildfire2\tree.cfg
mapkey sr @MAPKEY_LABELsurf round;#DONE;#FEATURE;#CREATE;#SURFACE;#NEW;\
mapkey(continued) #FILLET;#DONE;#DONE;#DONE;
mapkey sn @MAPKEY_LABELsurface new;#FEATURE;#CREATE;#SURFACE;#NEW;#DONE;\
mapkey(continued) #DONE;
mapkey se @MAPKEY_LABELsurf extend;#DONE;#FEATURE;#CREATE;#SURFACE;#EXTEND;\
mapkey(continued) #SINGLE DST;#DONE;
mapkey ii @MAPKEY_LABELinsert;#FEATURE;#INSERT MODE;#ACTIVATE;
mapkey ik @MAPKEY_LABELinsert kill;#FEATURE;#INSERT MODE;#CANCEL;Yes;\
mapkey(continued) ~ Activate `main_dlg_cur` `main_dlg_cur`;
shrinkwrap_alert no
mapkey sm @MAPKEY_LABELsrf merge;#FEATURE;#CREATE;#SURFACE;#MERGE;\
mapkey(continued) ~ FocusIn `Odui_Dlg_00` `sel.selbut.parent_quilt#0`;\
mapkey(continued) ~ FocusOut `Odui_Dlg_00` `sel.selbut.parent_quilt#0`;
mapkey gr @MAPKEY_LABELgroup local;#FEATURE;#GROUP;#LOCAL GROUP;;
mapkey pc @MAPKEY_LABELproject curve;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdDatumCurve.datum`;#PROJECTED;#DONE;#SELECT;\
mapkey(continued) #DONE;
display_point_tags yes
new_parameter_ui yes
spin_center_display no
mapkey pd @MAPKEY_LABELPARAMETER DELETE;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Utilities`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `Utilities.psh_params`;\
mapkey(continued) ~ ColumnSelect `relation_dlg` `ParTable`1 `access`;\
mapkey(continued) ~ Activate `relation_dlg` `TBDelParam`;\
mapkey(continued) ~ Activate `relation_dlg` `TBDelParam`;\
mapkey(continued) ~ Activate `relation_dlg` `TBDelParam`;\
mapkey(continued) ~ Activate `relation_dlg` `TBDelParam`;\
mapkey(continued) ~ Activate `relation_dlg` `TBDelParam`;\
mapkey(continued) ~ Activate `relation_dlg` `TBDelParam`;\
mapkey(continued) ~ Activate `relation_dlg` `TBDelParam`;\
mapkey(continued) ~ Activate `relation_dlg` `TBDelParam`;\
mapkey(continued) ~ Activate `relation_dlg` `TBDelParam`;\
mapkey(continued) ~ Activate `relation_dlg` `TBDelParam`;\
mapkey(continued) ~ Activate `relation_dlg` `TBDelParam`;\
mapkey(continued) ~ Activate `relation_dlg` `TBDelParam`;\
mapkey(continued) ~ Activate `relation_dlg` `TBDelParam`;\
mapkey(continued) ~ Activate `relation_dlg` `TBDelParam`;\
mapkey(continued) ~ Activate `relation_dlg` `TBDelParam`;\
mapkey(continued) ~ Activate `relation_dlg` `TBDelParam`;\
mapkey(continued) ~ Activate `relation_dlg` `TBDelParam`;~ Activate `relation_dlg` `PB_OK`;
sim_max_memory_usage 500
pro_note_dir c:\prodata

cadam_line_weights 2
pen1_line_weight 1
pen2_line_weight 1
pen3_line_weight 1
pen4_line_weight 1
mapkey y @MAPKEY_LABELlayers;~ Select `main_dlg_cur` `PHTLeft.ShowCB`;\
mapkey(continued) ~ Close `main_dlg_cur` `PHTLeft.ShowCB`;\
mapkey(continued) ~ Activate `main_dlg_cur` `LayerTreePB`1;
mapkey y @MAPKEY_LABELlayers;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewLyrs.view`1;
mapkey u @MAPKEY_LABELundo layers;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdViewLyrs.view`0;
mapkey t @MAPKEY_LABELtree;~ Activate `main_dlg_cur` `resizer_button_2`1;

mapkey rev1notes @MAPKEY_LABELAdds Rev1 Notes;#SET UP;#NOTES;#NEW;\
mapkey(continued) ~ FocusIn `note_3d` `inp_name`;~ Update `note_3d` `inp_name` `REV_1_N`;\
mapkey(continued) ~ FocusOut `note_3d` `inp_name`;~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` “;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Revision Number (T1, P1, A, etc.) in “Text” Area, Select \
mapkey(continued) “OK,” Then Select “Resume” to Continue;#NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_1_DESC_N`;~ FocusOut `note_3d` `inp_name`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Revision Description in “Text” Area, Select “OK,” then \
mapkey(continued) Select “Resume” to Continue;#NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_1_REGION_N`;\
mapkey(continued) ~ FocusOut `note_3d` `inp_name`;~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Drawing Zone where Revision is Shown in “Text” area, \
mapkey(continued) (Example: 1E4\;\
mapkey(continued) \means Sheet1, Location E4), Select “OK,” then Select “Resume” to Continue;\
mapkey(continued) #NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_1_DATE_N`;~ FocusOut `note_3d` `inp_name`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Activate `main_dlg_cur` `main_dlg_cur`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` `{0: DD MMM YYYY}\ndesigner`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` `{0: DD MMM YYYY}\n{1:J. DOE}`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSERevise “DD MMM YYYY” and “Designer” Making the Changes, Select \
mapkey(continued) “OK,” then Select “Resume” to Finish;%rev1param;%shownotes;

mapkey rev2notes @MAPKEY_LABELAdds Rev2 Notes;#SET UP;#NOTES;#NEW;\
mapkey(continued) ~ FocusIn `note_3d` `inp_name`;~ Update `note_3d` `inp_name` `REV_2_N`;\
mapkey(continued) ~ FocusOut `note_3d` `inp_name`;~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` “;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Revision Number (T2, P2, B, etc.) in “Text” Area, Select \
mapkey(continued) “OK,” Then Select “Resume” to Continue;#NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_2_DESC_N`;~ FocusOut `note_3d` `inp_name`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Revision Description in “Text” Area, Select “OK,” then \
mapkey(continued) Select “Resume” to Continue;#NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_2_REGION_N`;\
mapkey(continued) ~ FocusOut `note_3d` `inp_name`;~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Drawing Zone where Revision is Shown in “Text” area, \
mapkey(continued) (Example: 1E4\;\
mapkey(continued) \means Sheet1, Location E4), Select “OK,” then Select “Resume” to Continue;\
mapkey(continued) #NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_2_DATE_N`;~ FocusOut `note_3d` `inp_name`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Activate `main_dlg_cur` `main_dlg_cur`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` `{0: DD MMM YYYY}\ndesigner`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` `{0: DD MMM YYYY}\n{1:J. DOE}`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSERevise “DD MMM YYYY” and “Designer” Making the Changes, Select \
mapkey(continued) “OK,” then Select “Resume” to Finish;%rev2param;

mapkey rev3notes @MAPKEY_LABELAdds Rev3 Notes;#SET UP;#NOTES;#NEW;\
mapkey(continued) ~ FocusIn `note_3d` `inp_name`;~ Update `note_3d` `inp_name` `REV_3_N`;\
mapkey(continued) ~ FocusOut `note_3d` `inp_name`;~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` “;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Revision Number (T3, P3, C, etc.) in “Text” Area, Select \
mapkey(continued) “OK,” Then Select “Resume” to Continue;#NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_3_DESC_N`;~ FocusOut `note_3d` `inp_name`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Revision Description in “Text” Area, Select “OK,” then \
mapkey(continued) Select “Resume” to Continue;#NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_3_REGION_N`;\
mapkey(continued) ~ FocusOut `note_3d` `inp_name`;~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Drawing Zone where Revision is Shown in “Text” area, \
mapkey(continued) (Example: 1E4\;\
mapkey(continued) \means Sheet1, Location E4), Select “OK,” then Select “Resume” to Continue;\
mapkey(continued) #NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_3_DATE_N`;~ FocusOut `note_3d` `inp_name`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Activate `main_dlg_cur` `main_dlg_cur`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` `{0: DD MMM YYYY}\ndesigner`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` `{0: DD MMM YYYY}\n{1:J. DOE}`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSERevise “DD MMM YYYY” and “Designer” Making the Changes, Select \
mapkey(continued) “OK,” then Select “Resume” to Finish;%rev3param;

mapkey rev4notes @MAPKEY_LABELAdds Rev4 Notes;#SET UP;#NOTES;#NEW;\
mapkey(continued) ~ FocusIn `note_3d` `inp_name`;~ Update `note_3d` `inp_name` `REV_4_N`;\
mapkey(continued) ~ FocusOut `note_3d` `inp_name`;~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` “;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Revision Number (T4, P4, D, etc.) in “Text” Area, Select \
mapkey(continued) “OK,” Then Select “Resume” to Continue;#NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_4_DESC_N`;~ FocusOut `note_3d` `inp_name`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Revision Description in “Text” Area, Select “OK,” then \
mapkey(continued) Select “Resume” to Continue;#NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_4_REGION_N`;\
mapkey(continued) ~ FocusOut `note_3d` `inp_name`;~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Drawing Zone where Revision is Shown in “Text” area, \
mapkey(continued) (Example: 1E4\;\
mapkey(continued) \means Sheet1, Location E4), Select “OK,” then Select “Resume” to Continue;\
mapkey(continued) #NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_4_DATE_N`;~ FocusOut `note_3d` `inp_name`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Activate `main_dlg_cur` `main_dlg_cur`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` `{0: DD MMM YYYY}\ndesigner`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` `{0: DD MMM YYYY}\n{1:J. DOE}`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSERevise “DD MMM YYYY” and “Designer” Making the Changes, Select \
mapkey(continued) “OK,” then Select “Resume” to Finish;%rev4param;

mapkey rev5notes @MAPKEY_LABELAdds Rev5 Notes;#SET UP;#NOTES;#NEW;\
mapkey(continued) ~ FocusIn `note_3d` `inp_name`;~ Update `note_3d` `inp_name` `REV_5_N`;\
mapkey(continued) ~ FocusOut `note_3d` `inp_name`;~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` “;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Revision Number (T5, P5, E, etc.) in “Text” Area, Select \
mapkey(continued) “OK,” Then Select “Resume” to Continue;#NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_5_DESC_N`;~ FocusOut `note_3d` `inp_name`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Revision Description in “Text” Area, Select “OK,” then \
mapkey(continued) Select “Resume” to Continue;#NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_5_REGION_N`;\
mapkey(continued) ~ FocusOut `note_3d` `inp_name`;~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Drawing Zone where Revision is Shown in “Text” area, \
mapkey(continued) (Example: 1E4\;\
mapkey(continued) \means Sheet1, Location E4), Select “OK,” then Select “Resume” to Continue;\
mapkey(continued) #NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_5_DATE_N`;~ FocusOut `note_3d` `inp_name`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Activate `main_dlg_cur` `main_dlg_cur`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` `{0: DD MMM YYYY}\ndesigner`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` `{0: DD MMM YYYY}\n{1:J. DOE}`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSERevise “DD MMM YYYY” and “Designer” Making the Changes, Select \
mapkey(continued) “OK,” then Select “Resume” to Finish;%rev5param;

mapkey rev6notes @MAPKEY_LABELAdds Rev6 Notes;#SET UP;#NOTES;#NEW;\
mapkey(continued) ~ FocusIn `note_3d` `inp_name`;~ Update `note_3d` `inp_name` `REV_6_N`;\
mapkey(continued) ~ FocusOut `note_3d` `inp_name`;~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` “;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Revision Number (T6, P6, F, etc.) in “Text” Area, Select \
mapkey(continued) “OK,” Then Select “Resume” to Continue;#NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_6_DESC_N`;~ FocusOut `note_3d` `inp_name`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Revision Description in “Text” Area, Select “OK,” then \
mapkey(continued) Select “Resume” to Continue;#NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_6_REGION_N`;\
mapkey(continued) ~ FocusOut `note_3d` `inp_name`;~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Drawing Zone where Revision is Shown in “Text” area, \
mapkey(continued) (Example: 1E4\;\
mapkey(continued) \means Sheet1, Location E4), Select “OK,” then Select “Resume” to Continue;\
mapkey(continued) #NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_6_DATE_N`;~ FocusOut `note_3d` `inp_name`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Activate `main_dlg_cur` `main_dlg_cur`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` `{0: DD MMM YYYY}\ndesigner`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` `{0: DD MMM YYYY}\n{1:J. DOE}`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSERevise “DD MMM YYYY” and “Designer” Making the Changes, Select \
mapkey(continued) “OK,” then Select “Resume” to Finish;%rev6param;

mapkey rev7notes @MAPKEY_LABELAdds Rev7 Notes;#SET UP;#NOTES;#NEW;\
mapkey(continued) ~ FocusIn `note_3d` `inp_name`;~ Update `note_3d` `inp_name` `REV_7_N`;\
mapkey(continued) ~ FocusOut `note_3d` `inp_name`;~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` “;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Revision Number (T7, P7, G, etc.) in “Text” Area, Select \
mapkey(continued) “OK,” Then Select “Resume” to Continue;#NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_7_DESC_N`;~ FocusOut `note_3d` `inp_name`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Revision Description in “Text” Area, Select “OK,” then \
mapkey(continued) Select “Resume” to Continue;#NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_7_REGION_N`;\
mapkey(continued) ~ FocusOut `note_3d` `inp_name`;~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Drawing Zone where Revision is Shown in “Text” area, \
mapkey(continued) (Example: 1E4\;\
mapkey(continued) \means Sheet1, Location E4), Select “OK,” then Select “Resume” to Continue;\
mapkey(continued) #NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_7_DATE_N`;~ FocusOut `note_3d` `inp_name`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Activate `main_dlg_cur` `main_dlg_cur`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` `{0: DD MMM YYYY}\ndesigner`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` `{0: DD MMM YYYY}\n{1:J. DOE}`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSERevise “DD MMM YYYY” and “Designer” Making the Changes, Select \
mapkey(continued) “OK,” then Select “Resume” to Finish;%rev7param;

mapkey rev8notes @MAPKEY_LABELAdds Rev8 Notes;#SET UP;#NOTES;#NEW;\
mapkey(continued) ~ FocusIn `note_3d` `inp_name`;~ Update `note_3d` `inp_name` `REV_8_N`;\
mapkey(continued) ~ FocusOut `note_3d` `inp_name`;~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` “;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Revision Number (T8, P8, H, etc.) in “Text” Area, Select \
mapkey(continued) “OK,” Then Select “Resume” to Continue;#NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_8_DESC_N`;~ FocusOut `note_3d` `inp_name`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Revision Description in “Text” Area, Select “OK,” then \
mapkey(continued) Select “Resume” to Continue;#NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_8_REGION_N`;\
mapkey(continued) ~ FocusOut `note_3d` `inp_name`;~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Drawing Zone where Revision is Shown in “Text” area, \
mapkey(continued) (Example: 1E4\;\
mapkey(continued) \means Sheet1, Location E4), Select “OK,” then Select “Resume” to Continue;\
mapkey(continued) #NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_8_DATE_N`;~ FocusOut `note_3d` `inp_name`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Activate `main_dlg_cur` `main_dlg_cur`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` `{0: DD MMM YYYY}\ndesigner`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` `{0: DD MMM YYYY}\n{1:J. DOE}`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSERevise “DD MMM YYYY” and “Designer” Making the Changes, Select \
mapkey(continued) “OK,” then Select “Resume” to Finish;%rev8param;

mapkey rev9notes @MAPKEY_LABELAdds Rev9 Notes;#SET UP;#NOTES;#NEW;\
mapkey(continued) ~ FocusIn `note_3d` `inp_name`;~ Update `note_3d` `inp_name` `REV_9_N`;\
mapkey(continued) ~ FocusOut `note_3d` `inp_name`;~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` “;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Revision Number (T9, P9, I, etc.) in “Text” Area, Select \
mapkey(continued) “OK,” Then Select “Resume” to Continue;#NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_9_DESC_N`;~ FocusOut `note_3d` `inp_name`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Revision Description in “Text” Area, Select “OK,” then \
mapkey(continued) Select “Resume” to Continue;#NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_9_REGION_N`;\
mapkey(continued) ~ FocusOut `note_3d` `inp_name`;~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Drawing Zone where Revision is Shown in “Text” area, \
mapkey(continued) (Example: 1E4\;\
mapkey(continued) \means Sheet1, Location E4), Select “OK,” then Select “Resume” to Continue;\
mapkey(continued) #NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_9_DATE_N`;~ FocusOut `note_3d` `inp_name`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Activate `main_dlg_cur` `main_dlg_cur`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` `{0: DD MMM YYYY}\ndesigner`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` `{0: DD MMM YYYY}\n{1:J. DOE}`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSERevise “DD MMM YYYY” and “Designer” Making the Changes, Select \
mapkey(continued) “OK,” then Select “Resume” to Finish;%rev9param;

mapkey rev10notes @MAPKEY_LABELAdds Rev10 Notes;#SET UP;#NOTES;#NEW;\
mapkey(continued) ~ FocusIn `note_3d` `inp_name`;~ Update `note_3d` `inp_name` `REV_10_N`;\
mapkey(continued) ~ FocusOut `note_3d` `inp_name`;~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` “;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Revision Number (T10, P10, J, etc.) in “Text” Area, \
mapkey(continued) Select “OK,” Then Select “Resume” to Continue;#NEW;\
mapkey(continued) ~ FocusIn `note_3d` `inp_name`;~ Update `note_3d` `inp_name` `REV_10_DESC_N`;\
mapkey(continued) ~ FocusOut `note_3d` `inp_name`;~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Revision Description in “Text” Area, Select “OK,” then \
mapkey(continued) Select “Resume” to Continue;#NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_10_REGION_N`;\
mapkey(continued) ~ FocusOut `note_3d` `inp_name`;~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSEEnter Drawing Zone where Revision is Shown in “Text” area, \
mapkey(continued) (Example: 1E4\;\
mapkey(continued) \means Sheet1, Location E4), Select “OK,” then Select “Resume” to Continue;\
mapkey(continued) #NEW;~ FocusIn `note_3d` `inp_name`;\
mapkey(continued) ~ Update `note_3d` `inp_name` `REV_10_DATE_N`;\
mapkey(continued) ~ FocusOut `note_3d` `inp_name`;~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Activate `main_dlg_cur` `main_dlg_cur`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` `{0: DD MMM YYYY}\ndesigner`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ FocusIn `note_3d` `sym_area_note_text`;\
mapkey(continued) ~ Update `note_3d` `sym_area_note_text` `{0: DD MMM YYYY}\n{1:J. DOE}`;\
mapkey(continued) ~ FocusOut `note_3d` `sym_area_note_text`;\
mapkey(continued) @MANUAL_PAUSERevise “DD MMM YYYY” and “Designer” Making the Changes, Select \
mapkey(continued) “OK,” then Select “Resume” to Finish;%rev10param;

mapkey shownotes @MAPKEY_LABELShows Notes in Model Tree;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `View`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Select `main_dlg_cur` `View.cb_view_mdltreesetup`;\
mapkey(continued) ~ Close `main_dlg_cur` `View.cb_view_mdltreesetup`;\
mapkey(continued) ~ Activate `main_dlg_cur` `Filter`;~ Activate `mdl_filter` `note_btn`1 ;\
mapkey(continued) ~ Activate `mdl_filter` `ok_btn`;

mapkey rev1param @MAPKEY_LABELCreates Rev 1 Parameters;#SET UP;#PARAMETERS;\
mapkey(continued) #CREATE;#CONFIRM;#NOTE;rev_1;0;#NOTE;rev_1_desc;1;#NOTE;rev_1_region;2;#NOTE;\
mapkey(continued) rev_1_date;3;#RELATIONS;#ADD;drawing_rev=rev_1;;#REGENERATE;

mapkey rev2param @MAPKEY_LABELCreates Rev 2 Parameters;#SET UP;#PARAMETERS;\
mapkey(continued) #CREATE;#CONFIRM;#NOTE;rev_2;4;#NOTE;rev_2_desc;5;#NOTE;rev_2_region;6;#NOTE;\
mapkey(continued) rev_2_date;7;#RELATIONS;#ADD;drawing_rev=rev_2;;#REGENERATE;

mapkey rev3param @MAPKEY_LABELCreates Rev 3 Parameters;#SET UP;#PARAMETERS;\
mapkey(continued) #CREATE;#CONFIRM;#NOTE;rev_3;8;#NOTE;rev_3_desc;9;#NOTE;rev_3_region;10;\
mapkey(continued) #NOTE;rev_3_date;11;#RELATIONS;#ADD;drawing_rev=rev_3;;#REGENERATE;

mapkey rev4param @MAPKEY_LABELCreates Rev 4 Parameters;#SET UP;#PARAMETERS;\
mapkey(continued) #CREATE;#CONFIRM;#NOTE;rev_4;12;#NOTE;rev_4_desc;13;#NOTE;rev_4_region;14;\
mapkey(continued) #NOTE;rev_4_date;15;#RELATIONS;#ADD;drawing_rev=rev_4;;#REGENERATE;

mapkey rev5param @MAPKEY_LABELCreates Rev 5 Parameters;#SET UP;#PARAMETERS;\
mapkey(continued) #CREATE;#CONFIRM;#NOTE;rev_5;16;#NOTE;rev_5_desc;17;#NOTE;rev_5_region;18;\
mapkey(continued) #NOTE;rev_5_date;19;#RELATIONS;#ADD;drawing_rev=rev_5;;#REGENERATE;

mapkey rev6param @MAPKEY_LABELCreates Rev 6 Parameters;#SET UP;#PARAMETERS;\
mapkey(continued) #CREATE;#CONFIRM;#NOTE;rev_6;20;#NOTE;rev_6_desc;21;#NOTE;rev_6_region;22;\
mapkey(continued) #NOTE;rev_6_date;23;#RELATIONS;#ADD;drawing_rev=rev_6;;#REGENERATE;

mapkey rev7param @MAPKEY_LABELCreates Rev 7 Parameters;#SET UP;#PARAMETERS;\
mapkey(continued) #CREATE;#CONFIRM;#NOTE;rev_7;24;#NOTE;rev_7_desc;25;#NOTE;rev_7_region;26;\
mapkey(continued) #NOTE;rev_7_date;27;#RELATIONS;#ADD;drawing_rev=rev_7;;#REGENERATE;

mapkey rev8param @MAPKEY_LABELCreates Rev 8 Parameters;#SET UP;#PARAMETERS;\
mapkey(continued) #CREATE;#CONFIRM;#NOTE;rev_8;28;#NOTE;rev_8_desc;29;#NOTE;rev_8_region;30;\
mapkey(continued) #NOTE;rev_8_date;31;#RELATIONS;#ADD;drawing_rev=rev_8;;#REGENERATE;

mapkey rev9param @MAPKEY_LABELCreates Rev 9 Parameters;#SET UP;#PARAMETERS;\
mapkey(continued) #CREATE;#CONFIRM;#NOTE;rev_9;32;#NOTE;rev_9_desc;33;#NOTE;rev_9_region;34;\
mapkey(continued) #NOTE;rev_9_date;35;#RELATIONS;#ADD;drawing_rev=rev_9;;#REGENERATE;

mapkey rev10param @MAPKEY_LABELCreates Rev 10 Parameters;#SET UP;#PARAMETERS;\
mapkey(continued) #CREATE;#CONFIRM;#NOTE;rev_10;36;#NOTE;rev_10_desc;37;#NOTE;rev_10_region;38;\
mapkey(continued) #NOTE;rev_10_date;39;#RELATIONS;#ADD;drawing_rev=rev_10;;#REGENERATE;

mapkey modelparam @MAPKEY_LABELCreates Model Parameters;#SET UP;#PARAMETERS;\
mapkey(continued) #CREATE;#CONFIRM;#STRING;engineered_by;FLEXTRONICS DESIGN;#STRING;\
mapkey(continued) DESIGNED_BY;<Designed_By>;#STRING;APPROVED_BY;<Approved_By>;#STRING;DRAWN_BY;\
mapkey(continued) <Drawn_By>;#STRING;CUSTOMER;<Customer>;#STRING;PROJECT_NAME;<Project_Name>;\
mapkey(continued) #STRING;PART_NUMBER;<Part_Number>;#STRING;CUST_PART_NUMBER;\
mapkey(continued) <Customer_Part_Number>;#STRING;DESCRIPTION_1;<Description_1>;#STRING;\
mapkey(continued) DESCRIPTION_2;<Description_2>;#STRING;DESCRIPTION_3;<Description_3>;#STRING;\
mapkey(continued) PART_STATUS;DEVELOPMENT;#STRING;MATERIAL1;<Material1>;#STRING;MATERIAL2;\
mapkey(continued) <Material2>;#STRING;FINISH1;<Finish1>;#STRING;FINISH2;<Finish2>;#STRING;\
mapkey(continued) FINISH3;<Finish3>;#STRING;PAINT;<Paint>;#STRING;COATING;<Coating>;#STRING;\
mapkey(continued) COLOR1;<Color1>;#STRING;COLOR2;<Color2>;#STRING;COLOR3;<Color3>;#REAL NUMBER;\
mapkey(continued) VOLUME;;#STRING;PART_REV;<Part_Rev>;#STRING;DRAWING_REV;<drawing_rev>;

mapkey drawingrev @MAPKEY_LABELCreates Model Parameter Drawing Revision;\
mapkey(continued) #SET UP;#PARAMETERS;#CREATE;#CONFIRM;#STRING;DRAWING_REV;<drawing_rev>;\
mapkey(continued) #RELATIONS;#ADD;drawing_rev=rev_1;;#REGENERATE;

mapkey $F12 @MAPKEY_LABELNEW PARAM;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Utilities`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `Utilities.psh_util_pref`;\
mapkey(continued) ~ FocusOut `preferences` `InputOpt`;\
mapkey(continued) ~ Select `preferences` `AssyTree`1 `node0:new_parameter_ui : no : 3`;\
mapkey(continued) ~ Open `preferences` `EditPanel`;~ Close `preferences` `EditPanel`;\
mapkey(continued) ~ Select `preferences` `EditPanel`1 `yes *`;\
mapkey(continued) ~ Activate `preferences` `AddOpt`;~ FocusOut `preferences` `InputOpt`;\
mapkey(continued) ~ Activate `preferences` `ApplySave`;~ FocusOut `preferences` `InputOpt`;\
mapkey(continued) ~ Activate `preferences` `Close`;
mapkey $F11 @MAPKEY_LABELOLD PARAM;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Utilities`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `Utilities.psh_util_pref`;\
mapkey(continued) ~ FocusOut `preferences` `InputOpt`;\
mapkey(continued) ~ Select `preferences` `AssyTree`1 `node0:new_parameter_ui : yes : 3`;\
mapkey(continued) ~ Open `preferences` `EditPanel`;~ Close `preferences` `EditPanel`;\
mapkey(continued) ~ Select `preferences` `EditPanel`1 `no`;~ Activate `preferences` `AddOpt`;\
mapkey(continued) ~ FocusOut `preferences` `InputOpt`;~ Activate `preferences` `ApplySave`;\
mapkey(continued) ~ FocusOut `preferences` `InputOpt`;~ Activate `preferences` `Close`;
new_relation_ui yes

mapkey nm @MAPKEY_LABELnominal;\
mapkey(continued) ~ Timer `UI Desktop` `UI Desktop` `popupMenuRMBTimerCB`;\
mapkey(continued) ~ Close `rmb_popup` `PopupMenu`;\
mapkey(continued) ~ Activate `rmb_popup` `DwgPopupEditProperties`;\
mapkey(continued) ~ Open `mod_dim_asynch` `opt_tol_mode`;\
mapkey(continued) ~ Close `mod_dim_asynch` `opt_tol_mode`;\
mapkey(continued) ~ Select `mod_dim_asynch` `opt_tol_mode`1 `Nominal`;\
mapkey(continued) ~ Activate `mod_dim_asynch` `psh_ok`;
mapkey nm @MAPKEY_LABELnominal;\
mapkey(continued) ~ Timer `UI Desktop` `UI Desktop` `popupMenuRMBTimerCB`;\
mapkey(continued) ~ Close `rmb_popup` `PopupMenu`;\
mapkey(continued) ~ Activate `rmb_popup` `DwgPopupEditProperties`;\
mapkey(continued) ~ Open `mod_dim_asynch` `opt_tol_mode`;\
mapkey(continued) ~ Close `mod_dim_asynch` `opt_tol_mode`;\
mapkey(continued) ~ Select `mod_dim_asynch` `opt_tol_mode`1 `Nominal`;\
mapkey(continued) ~ Activate `mod_dim_asynch` `psh_ok`;
mapkey pl @MAPKEY_LABELPRELIMINARY;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Insert`;\
mapkey(continued) ~ Select `main_dlg_cur` `Insert.cb_dwg_sym`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;~ Close `main_dlg_cur` `Insert.cb_dwg_sym`;\
mapkey(continued) ~ Activate `main_dlg_cur` `psh_dwg_sym_custom`;\
mapkey(continued) ~ Activate `drawing_sym` `browse`;\
mapkey(continued) ~ Select `file_open` `Ph_list.Filelist`1 `preliminary.sym`;\
mapkey(continued) ~ Activate `file_open` `Open`;~ Activate `drawing_sym` `OK_push`;
mapkey sy @MAPKEY_LABELSYMBOL;~ Select `main_dlg_cur` `MenuBar1`1 `Insert`;\
mapkey(continued) ~ Select `main_dlg_cur` `Insert.cb_dwg_sym`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;~ Close `main_dlg_cur` `Insert.cb_dwg_sym`;\
mapkey(continued) ~ Activate `main_dlg_cur` `psh_dwg_sym_custom`;\
mapkey(continued) ~ Activate `drawing_sym` `browse`;
system_colors_file C:\prodata\syscol.scl
mapkey sm @MAPKEY_LABELsrf merge;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdFtMerge.b_feat`;\
mapkey(continued) ~ Activate `main_dlg_cur` `maindashInst0.Flip1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `maindashInst0.Flip2`;
fem_default_solver nastran
fem_which_ansys_solver frontal
pro_ansys_path F:\Program Files\Ansys Inc\v100\ANSYS\bin\intel\ANSYS.exe
mapkey wq ~ Activate `main_dlg_cur` `sim_weld_tlb.sim_ac`;\
mapkey(continued) ~ Open `sim_dlg_weld` `TypeOption`;~ Close `sim_dlg_weld` `TypeOption`;\
mapkey(continued) ~ Select `sim_dlg_weld` `TypeOption`1 `Perimeter Weld`;\
mapkey(continued) ~ Update `sim_dlg_weld` `ThickPH.ScalarInput` `3`;\
mapkey(continued) ~ Activate `sim_dlg_weld` `GeomPairPH.GeomPush`;

mapkey cg @MAPKEY_LABELcopy_geom point;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Insert`;\
mapkey(continued) ~ Select `main_dlg_cur` `Insert.cb_sharedata`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Close `main_dlg_cur` `Insert.cb_sharedata`;\
mapkey(continued) ~ Activate `main_dlg_cur` `pshDataShrCopyGeom`;\
mapkey(continued) ~ Select `Odui_Dlg_01` `odui_steps`1 `MISC REFS`;\
mapkey(continued) ~ Activate `Odui_Dlg_01` `odui_steps`1 `MISC REFS`;\
mapkey(continued) ~ Activate `gcpy_misc_refs` `CBDtmPoint`1;
mapkey pi @MAPKEY_LABELpipe;~ Select `main_dlg_cur` `MenuBar1`1 `Insert`;\
mapkey(continued) ~ Select `main_dlg_cur` `Insert.cb_advanced`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Close `main_dlg_cur` `Insert.cb_advanced`;\
mapkey(continued) ~ Activate `main_dlg_cur` `pshPipe`;#DONE;.75;.2;
search_path F:\Ptc\wf2\aes\pintle
search_path F:\Ptc\wf2\aes\RT120_JAN1806
mapkey nt @MAPKEY_LABELnote;~ Select `main_dlg_cur` `MenuBar1`1 `Insert`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `Insert.psh_dwg_note`;#MAKE NOTE;
mapkey bv @MAPKEY_LABELbv;\
mapkey(continued) ~ Activate `main_dlg_cur` `ProCmdRstCrvMerge.tbRstl`;
mapkey oo @MAPKEY_LABELdiameter;~ FocusIn `mod_dim_asynch` `txt_dim_text`;\
mapkey(continued) ~ FocusOut `mod_dim_asynch` `txt_dim_text`;\
mapkey(continued) ~ Activate `mod_dim_asynch` `psh_sym_palette`;\
mapkey(continued) ~ Activate `sympalette` `sp_110`;\
mapkey(continued) ~ Update `mod_dim_asynch` `txt_dim_text` `@D n `;\
mapkey(continued) ~ FocusOut `mod_dim_asynch` `txt_dim_text`;

mapkey cd @MAPKEY_LABELcoordinate distance;\
mapkey(continued) ~ Select `main_dlg_cur` `MenuBar1`1 `Analysis`;\
mapkey(continued) ~ Close `main_dlg_cur` `MenuBar1`;\
mapkey(continued) ~ Activate `main_dlg_cur` `Analysis.psh_analysis_measure`;\
mapkey(continued) ~ Open `measure` `DistFromOptions`;~ Close `measure` `DistFromOptions`;\
mapkey(continued) ~ Select `measure` `DistFromOptions`1 `Csys`;\
mapkey(continued) ~ Open `measure` `DistToOptions`;~ Close `measure` `DistToOptions`;\
mapkey(continued) ~ Select `measure` `DistToOptions`1 `Point`;\
mapkey(continued) ~ Open `measure` `DistProjRefOptions`;~ Close `measure` `DistProjRefOptions`;\
mapkey(continued) ~ Select `measure` `DistProjRefOptions`1 `Csys`;\
mapkey(continued) ~ Activate `measure` `DistFromSelect`;

Compartilhe:

Close Bookmark and Share This Page

Save to Browser Favorites / Bookmarks

Ask backflip blinklist BlogBookmark Bloglines BlogMarks Blogsvine BuddyMarks BUMPzee! CiteULike Connotea del.icio.us

Digg diigo DotNetKicks DropJack dzone Facebook Fark Faves Friendsite folkd.com Furl Google

Jamespot Jeqq Kaboodle kirtsy linkaGoGo LinkedIn Ma.gnolia Mister Wong Mixx MySpace Netvouz Newsvine

oneview OnlyWire PlugIM Propeller Reddit Segnalo Shoutwire Simpy Slashdot Surphace Sphinn Spurl

Squidoo StumbleUpon Technorati ThisNext Twitter Webride Windows Live Yahoo!

Email This to a Friend

  Link HTML: 

 Permalink: 

 If you like this then please subscribe to the RSS Feed.

Powered by Bookmarkify™

More »

Powered by Bookmarkify™

É comum, para os novos usuários do Pro-E que já estão acostumados ao AutoCAD, sentirem falta dos inúmeros comandos de teclado.

Não se desespere, através das chamadas mapkeys, é possível reproduzir boa parte dos comandos conhecidos.

Uma mapkey nada mais é do que uma sequência de comandos a serem executados após ser pressionada uma ou mais teclas.

Existem duas maneiras de criar um mapkey: Editando o arquivo config.pro ou através do menu do Pro|E.

Criando mapkeys através do menu do Pro|E

Vá ao menu Tools > Mapkeys, a seguinte tela aparecerá:

Clique em New, a seguinte tela aparece:

Digite a sequência de letras a partir das quais o mapkey deve ser acionado.

Então clique no botão Record. Em seguida, execute os comandos que você deseja que esta mapkey faça.

Quando terminar, clique em Stop, depois em OK.

Na outra tela, em “Save Mapkeys” clique em All, para que todas as mapkey (antigas e novas) sejam salvas. Senão fizer isso você perderá as novas mapkeys quando fechar o ProE.

Agora, após fechar a tela das mapkey, para testar, digite a sequência de letras que você definiu na mapkey. Todos os comandos que você executou entre o clique em “Record” e “Stop” deverão ser executados.

Criando mapkeys editando o config.pro

Você pode criar mapkeys diretamente no config.pro. Porém para isso é necessário ter os “scripts” das mapkeys em mãos. Exemplos desses mapkeys podem ser encontrados neste post: Exemplos de Mapkeys

Vá ao arquivo config.pro do ProE, que fica na pasta de instalação do Pro|E, dentro da pasta text: C:\Program Files\proeWildfire 4.0\text

Vá ao final do arquivo e cole os scripts das mapkeys que lhe interessaram.

Qualquer dúvida, comentem este post.

Compartilhe:

Close Bookmark and Share This Page

Save to Browser Favorites / Bookmarks

Ask backflip blinklist BlogBookmark Bloglines BlogMarks Blogsvine BuddyMarks BUMPzee! CiteULike Connotea del.icio.us

Digg diigo DotNetKicks DropJack dzone Facebook Fark Faves Friendsite folkd.com Furl Google

Jamespot Jeqq Kaboodle kirtsy linkaGoGo LinkedIn Ma.gnolia Mister Wong Mixx MySpace Netvouz Newsvine

oneview OnlyWire PlugIM Propeller Reddit Segnalo Shoutwire Simpy Slashdot Surphace Sphinn Spurl

Squidoo StumbleUpon Technorati ThisNext Twitter Webride Windows Live Yahoo!

Email This to a Friend

  Link HTML: 

 Permalink: 

 If you like this then please subscribe to the RSS Feed.

Powered by Bookmarkify™

More »

Powered by Bookmarkify™